有人会用NEXTTool工具下载吗

dannajiang

我用NEXTTool在cmd窗口下运行下载rxe文件，不知道下载下去没有，怎么看呢？cmd窗口有显示什么其他信息吗？

糖伯虎

NeXTTool - USB & Bluetooth NXT communication utility

C:\winapps\projects\BricxCC>nexttool -help
NeXTTool version 1.0 (1.0.9.1, built April 12 2007 13:26:42)
     Copyright (c) 2006 John Hansen
Usage: NeXTTool [options] [actions]
Options:
   /COM=port: specify port name (COMn, usb, resource string, or alias)
   /BT[=name]: use bluetooth (selects the first brick found or the named brick)
   /HEX: use hexidecimal for numeric output
   /Duration=<n>: specify the tone duration for the playtone action
   /Inbox=<n>: use inbox number n when sending or reading a message
   /Loop: loop when playing sound files
   /Relative: reset output position relative
   /Empty: empty mailbox when reading
   /Bin[=filename]: dump data output as binary to a file (nxt.bin)
Actions:
   -init : initialize nxt.dat file
   -listbricks : list resource names of all found NXT bricks
   -clear : erase all items on the brick
   -battery : return the battery level
   -input=<N> : read input N (0-3)
   -output=<N> : read the status of output N (0-2)
   -mute : stop playing sounds
   -playtone=<frequency> : play a tone for the specified duration
   -run=<filename> : run the specified program
   -runningprogram : return the name of the currently running program
   -stop : stop the currently running program
   -playfile=<filename> : play the specified sound file
   -firmware=<filename> : download firmware
   -download=<filename> : download the specified file to the NXT
   -upload[=<pattern>] : upload the specified file(s) from the NXT (or *.*)
   -listfiles[=<pattern>] : list the files matching the pattern (or *.*)
   -listmodules[=<pattern>] : list the modules matching the pattern (or *.*)
   -delete=<filename> : delete the specified file from the NXT
   -datalog | -datalog_full: upload datalog (_full == verbose)
   -eeprom=<n> | -eeprom_full: upload eeprom block (_full == all blocks)
   -memory=<n> | -memory_full: upload 128 bytes of memory (_full == all memory)
   -map: upload memory map
   -keepalive : return the current sleep time limit
   -sleep=<timeout> : set NXT sleep timeout (in minutes)
   -msg=<string> : send the specified message to the NXT
   -readmsg=<box> : read the message from the specified box
   -resetoutputposition=<port> : reset the position for the specified port
   -resetinputsv=<port> : reset the input scaled value for the specified port
   -setname=<new_name> : set the name of the NXT
   -getname : return the name of the NXT
   -versions : return the NXT firmware and protocol versions
   -deviceinfo : return all NXT device information
   -freemem : return the amount of free memory
   -lsstatus=<port> : return the low speed status for the specified port
   -boot : reset the NXT into SAMBA mode (usb only)
   -btreset : reset the NXT bluetooth to factory settings (usb only)
   -defrag : defragment the NXT filesystem
General:
   -help : display command line options

C:\winapps\projects\BricxCC>nexttool -clear

C:\winapps\projects\BricxCC>nexttool -download=g:\nxt\programs\a2.rxe

C:\winapps\projects\BricxCC>nexttool -download=g:\nxt\programs\nxtway.rxe

C:\winapps\projects\BricxCC>nexttool -download=g:\nxt\programs\compass2.rxe

C:\winapps\projects\BricxCC>nexttool -download=g:\nxt\programs\flourish_t3.rxe

C:\winapps\projects\BricxCC>nexttool -listfiles
flourish_t3.rxe=6600
compass2.rxe=774
nxtway.rxe=472
a2.rxe=644

C:\winapps\projects\BricxCC>nexttool -listmodules
Comm.mod=327681, 0, 1896
Input.mod=196609, 0, 80
Button.mod=262145, 0, 36
Display.mod=655361, 0, 1720
Loader.mod=589825, 0, 8
Low Speed.mod=720897, 0, 167
Output.mod=131073, 0, 100
Sound.mod=524289, 0, 30
IOCtrl.mod=393217, 0, 2
Command.mod=65537, 0, 32820
Ui.mod=786433, 0, 40

C:\winapps\projects\BricxCC>nexttool -listbricks
USB0::0X0694::0X0002::001653FF0156::RAW

C:\winapps\projects\BricxCC>type nxt.dat
x=USB0::0X0694::0X0002::001653FF0156::RAW
JCH2=BTH::JCH2::00:16:53:FF:01:56::5

C:\winapps\projects\BricxCC>nexttool /COM=x -versions
Protocol version = 1.124
Firmware version = 1.3

C:\winapps\projects\BricxCC>nexttool /COM=x -getname
JCH2

C:\winapps\projects\BricxCC>nexttool /COM=x -deviceinfo
Brick name = JCH2
Bluetooth Address = 0
Bluetooth signal strength = 0
Free memory = 124680

C:\winapps\projects\BricxCC>nexttool /COM=x -runningprogram
a2.rxe

C:\winapps\projects\BricxCC>nexttool /COM=x -stop

C:\winapps\projects\BricxCC>nexttool /COM=x -run=a2.rxe

C:\winapps\projects\BricxCC>nexttool /COM=x -runningprogram
a2.rxe

C:\winapps\projects\BricxCC>nexttool /COM=USB0::0X0694::0X0002::001653FF0156::RAW -battery
7284

C:\winapps\projects\BricxCC>nexttool /COM=usb -freemem
124680

C:\winapps\projects\BricxCC>dir *.rxe
Volume in drive C has no label.
Volume Serial Number is D433-F70A

Directory of C:\winapps\projects\BricxCC

File Not Found

C:\winapps\projects\BricxCC>nexttool /COM=x -upload=a2.rxe

C:\winapps\projects\BricxCC>dir *.rxe
Volume in drive C has no label.
Volume Serial Number is D433-F70A

Directory of C:\winapps\projects\BricxCC

05/11/2006  06:00 PM               644 a2.rxe
               1 File(s)            644 bytes
               0 Dir(s)  50,024,546,304 bytes free

C:\winapps\projects\BricxCC>nexttool /COM=x -playtone=440 /Duration=50

C:\winapps\projects\BricxCC>nexttool -firmware=g:\nxt\firm103.rfw

dannajiang

糖伯虎 发表于 2011-8-30 23:29
NeXTTool - USB & Bluetooth NXT communication utility

C:\winapps\projects\BricxCC>nexttool -help

楼上的朋友啊，这个Nexttool这个命令我是会用的，就是不知道下载之后反馈是啥，我用了这个命令下载了之后，看着没啥变化，也不知道下去没？