请教：fll比赛用赛台桌的制作图纸或精准尺寸说明

lienafox

现在训练用的台子总感觉不太标准，谁有详细的数据，我以前的找不到了。

悟德

隐约记得是48英寸宽，96英寸长，和WRO是同大的，

特别不能战斗

Assembly
Step 1 — Determine which face of the plywood (A) is least smooth, and consider that the bottom face. On the bottom
face, locate, clamp, and screw on the stiffeners (D) (about every 18 inches). Be sure screw head tops are flush. Sand any
splinters.
Step 2 — On the top face of the plywood, locate, clamp, and screw on the border walls (B,C) around the top perimeter.
The wall-to-wall dimensions must measure 93±1/8” by 45±1/8” (2362±3mm by 1143±3mm), and the height of the
height of B and C must measure 3±1/2” (77±13mm), with all border walls being the same height as each other.
Step 3 — With the help of another person, place this table top on short saw horses (or milk crates, or anything else short
and solid).

悟德

原来是有误差的呀

macro

桌子高度建议为60cm，基本符合中国人身高。
内侧为黑色亚光漆

kpsoft

这里还有个DIY场地的介绍：http://www.erichuang.com/370963385326684/fll_wro_table

blomqvist

有定做的报价单吗，哪里有做

zxcvcv

也是刚入手，刚做了60cm高,感觉矮了点。如果和课桌差不多（70cm）吧，学生会做在登子上利用赛台搭机器人。低了只能在其他地方搭。